BRAH Electric continues to support your electrical equipment needs and remains fully operational during the COVID-19 pandemic. We are in compliance with California State law and maintain best practices as outlined by the CDC. All packages are disinfected and sanitized prior to shipment. For more information on how BRAH Electric stays current with California State guidelines, please Contact us at: 1 (855) 355-2725.
close
×

Registration

Profile Information

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Circuit Breakers

Replacement circuit breakers and circuit breaker parts by BRAH Electric. All products are aftermarket direct replacements for OEM products or designed to fit OEM products and include a full 1 year warranty.

Set Ascending Direction

1-20 of 205

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. SQDTC

    SQDTC

    SQDTC, BRAH Electric, Powerpact, test kits, direct replacement/aftermarket seven-pin test cable for OEM S48907, used in connection between S33595 test kit and Micrologic solid state electronic devices Learn More
    Replaces OEM part: Square D - Powerpact - S48907

    Distributors / wholesalers login for pricing and checkout.

  2. SFPLUGCAP

    SFPLUGCAP

    SFPLUGCAP, BRAH Electric aftermarket replacement set of 3 lug caps, suitable for use with General Electric Spectra Series SFDA, SFHA, SFLA, SFPA molded case breakers Learn More
    Replaces OEM part: General Electric - Spectra Series - SF3LCK

    Distributors / wholesalers login for pricing and checkout.

  3. SEPLUGCAP

    SEPLUGCAP

    SEPLUGCAP, BRAH Electric aftermarket replacement set of 3 lug caps, suitable for use with General Electric Spectra Series SEDA, SEHA, SELA, SEPA molded case breakers Learn More
    Replaces OEM part: General Electric - Spectra Series - SE3LCK

    Distributors / wholesalers login for pricing and checkout.

  4. SE4000GFCT

    SE4000GFCT

    SE4000GFCT, BRAH Electric, aftermarket direct replacement, ground fault current transformer, rated for 4000A, suitable for use with all Square D SE Series insulated case low-voltage power circuit breakers (SED, SEF, SEHD, SEHF frames), the current transformer "CT" is intended to be used with all SE breakers that have Micrologic trip unit with ground fault protection (LSG, LIG, LSIG) Learn More

    Distributors / wholesalers login for pricing and checkout.

  5. PB2-BUMP

    PB2-BUMP

    PB2-BUMP, BRAH Electric, aftermarket "bumper kit" includes the associated parts and screws shown in the related photos; for GE Power Break II insulated case breakers' manual charging mechanism to engage the closed position Learn More
    Replaces OEM part: General Electric - Power Break II - SPBUMPERKIT

    Distributors / wholesalers login for pricing and checkout.

  6. PB1STB

    PB1STB

    PB1STB, BRAH Electric, aftermarket direct replacement side mount terminal bracket assembly, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this bracket is required when imstalling wiring terminal blocks to the side wall of Power Break I. (bracket harness assembly only, does not inlcude terminal blocks) Learn More

    Distributors / wholesalers login for pricing and checkout.

  7. PB1OSMSI

    PB1OSMSI

    PB1OSMSI, BRAH Electric, aftermarket direct replacement, customizable nameplate, laser etched and engraved, crisp aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case low-voltage power circuit breakers, designed & engineered specifically to fit the older style PB1, manually operated, small frame, inverted configuration rated 800A - 2000A *Note - there are rare instances where a 2000A rated breaker could be in the large frame (in which case you would need PB1OSMLI), only in the older style Power Break I. Please contact our sales team if you have an older style 2000A breaker and we can confirm wether it is the small or large frame, to be sure you order the correct nameplate Learn More

    Distributors / wholesalers login for pricing and checkout.

  8. PB1OSMS

    PB1OSMS

    PB1OSMS, BRAH Electric, aftermarket direct replacement, customized nameplate, etched and engraved aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this face plate is designed to specifically fit the older style, manually operated, small frame, rated 800A - 2000A *Note - there are rare instances where a 2000A rated breaker could be in the large frame (in which case you would need PB1OSML), only in the older style Power Break I. Please contact our sales team if you have an older style 2000A breaker and we can confirm wether its small or large frame to be sure you order the correct nameplate Learn More

    Distributors / wholesalers login for pricing and checkout.

  9. PB1OSMLI

    PB1OSMLI

    PB1OSMLI, BRAH Electric, aftermarket direct replacement, customizable nameplate, laser etched and engraved, crisp aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case low-voltage power circuit breakers, designed & engineered specifically to fit the older style PB1, manually operated, large frame, inverted configuration rated 2500A - 4000A *Note - there are rare instances where a 2000A rated breaker could be in the large frame, only in the older style Power Break I. Please contact our sales team if you have an older style 2000A breaker and we can confirm wether it is the small or large frame, to be sure you order the correct nameplate Learn More

    Distributors / wholesalers login for pricing and checkout.

  10. PB1OSML

    PB1OSML

    PB1OSML, BRAH Electric, aftermarket direct replacement, customized nameplate, etched and engraved aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this face plate is designed to specifically fit the older style, manually operated, large frame rated 2500A - 4000A *Note - there are rare instances where a 2000A rated breaker could be in the large frame, only in the older style Power Break I. Please contact our sales team if you have an older style 2000A breaker and we can confirm wether its small or large frame to be sure you order the correct nameplate Learn More

    Distributors / wholesalers login for pricing and checkout.

  11. PB1OSESI

    PB1OSESI

    PB1OSESI, BRAH Electric, aftermarket direct replacement, customized nameplate, etched and engraved aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this face plate is designed to specifically fit the older style, electrically operated, small frame, inverted configuration rated 800A - 2000A *Note - there are rare instances where a 2000A rated breaker could be in the large frame (in which case you would need PB1OSELI), only in the older style Power Break I. Please contact our sales team if you have an older style 2000A breaker and we can confirm wether its small or large frame to be sure you order the correct nameplate Learn More

    Distributors / wholesalers login for pricing and checkout.

  12. PB1OSES

    PB1OSES

    PB1OSES, BRAH Electric, aftermarket direct replacement, customized nameplate, etched and engraved aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this face plate is designed to specifically fit the older style, electrically operated, small frame, rated 800A - 2000A *Note - there are rare instances where a 2000A rated breaker could be in the large frame (in which case you would need PB1OSEL), only in the older style Power Break I. Please contact our sales team if you have an older style 2000A breaker and we can confirm wether its small or large frame to be sure you order the correct nameplate Learn More

    Distributors / wholesalers login for pricing and checkout.

  13. PB1OSELI

    PB1OSELI

    PB1OSELI, BRAH Electric, aftermarket direct replacement, customized nameplate, etched and engraved aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this face plate is designed to specifically fit the older style, electrically operated, large frame, inverted configuration rated 2500A - 4000A *Note - there are rare instances where a 2000A rated breaker could be in the large frame, only in the older style Power Break I. Please contact our sales team if you have an older style 2000A breaker and we can confirm wether its small or large frame to be sure you order the correct nameplate Learn More

    Distributors / wholesalers login for pricing and checkout.

  14. PB1OSEL

    PB1OSEL

    PB1OSEL, BRAH Electric, aftermarket direct replacement, customized nameplate, etched and engraved aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this face plate is designed to specifically fit the older style, electrically operated, large frame rated 2500A - 4000A *Note - there are rare instances where a 2000A rated breaker could be in the large frame, only in the older style Power Break I. Please contact our sales team if you have an older style 2000A breaker and we can confirm wether its small or large frame to be sure you order the correct nameplate Learn More

    Distributors / wholesalers login for pricing and checkout.

  15. PB1NSMSI

    PB1NSMSI

    PB1NSMSI, BRAH Electric, aftermarket direct replacement, customized nameplate, etched and engraved aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this face plate is designed to specifically fit the newer style, manually operated, small frame, inverted configuration rated 2500A - 4000A Learn More

    Distributors / wholesalers login for pricing and checkout.

  16. PB1NSMS

    PB1NSMS

    PB1NSMS, BRAH Electric, aftermarket direct replacement, customizable nameplate, laser etched and engraved, crisp aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case low-voltage power circuit breakers, designed & engineered specifically to fit and install on the newer style PB1, manually operated, small frame rated 800A - 2000A Learn More

    Distributors / wholesalers login for pricing and checkout.

  17. PB1NSMLI

    PB1NSMLI

    PB1NSMLI, BRAH Electric, aftermarket direct replacement, customized nameplate, etched and engraved aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this face plate is designed to specifically fit the newer style, manually operated, large frame, inverted configuration rated 2500A - 4000A Learn More

    Distributors / wholesalers login for pricing and checkout.

  18. PB1NSML

    PB1NSML

    PB1NSML, BRAH Electric, aftermarket direct replacement, customizable nameplate, laser etched and engraved, crisp aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case low-voltage power circuit breakers, designed & engineered specifically to fit and install on the newer style PB1, manually operated, large frame rated 2500A - 4000A Learn More

    Distributors / wholesalers login for pricing and checkout.

  19. PB1NSESI

    PB1NSESI

    PB1NSESI, BRAH Electric, aftermarket direct replacement, customized nameplate, etched and engraved aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case power circuit breakers, this face plate is designed to specifically fit the newer style, electrically operated, small frame, inverted configuration rated 2500A - 4000A Learn More

    Distributors / wholesalers login for pricing and checkout.

  20. PB1NSES

    PB1NSES

    PB1NSES, BRAH Electric, aftermarket direct replacement, customizable nameplate, laser etched and engraved, crisp aluminium finish, suitable for use with General Electric Power Break I "PB1", insulated case low-voltage power circuit breakers, designed & engineered specifically to fit the newer style PB1, electrically operated, small frame rated 800A - 2000A Learn More

    Distributors / wholesalers login for pricing and checkout.

Set Ascending Direction

1-20 of 205

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5